LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Tucson GL, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Delivery Pipe >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Release the residual pressure in fuel line. (Refer to RELEASE RESIDUAL PRESSURE IN FUEL LINE .)
    CAUTION: When removing the fuel pump relay, a Diagnostic Trouble Code (DTC) may occur. Delete the code with the GDS after completion of RELEASE RESIDUAL PRESSURE IN FUEL LINE  work.
  3. Disconnect the injector connector (A).
  4. Remove the wiring harness bracket installation bolt (B).
  5. Remove the installation nut, and then disconnect the fuel feed tube (C).
  6. Remove the installation bolt (D), and then remove the delivery pipe & injector assembly from the engine.
    Fig 1: Identifying Injector Connector, Bracket Installation Bolt, Fuel Feed Tube And Installation Bolt
    G06874361Courtesy of HYUNDAI MOTOR CO.
    Fig 2: Identifying Delivery Pipe And Injector Assembly
    G06874362Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals