Motor Driven Power Steering System DTCS
MOTOR DRIVEN POWER STEERING SYSTEM DIAGNOSTIC TROUBLE CODES (DTC) IDENTIFICATION
| DTC | Description |
|---|---|
| DTC C1101 | Battery Voltage High |
| DTC C1102 | Battery Voltage Low |
| DTC C1103 | Ignition Voltage Fault |
| DTC C1259 | Steering Angle Sensor_Electrical Malfunction |
| DTC C1261 | Steering Angle Sensor Not Calibrated |
| DTC C1290 | Torque sensor main signal fail |
| DTC C1603 | Derating (EPS Thermal Protection) |
| DTC C1604 | ECU Hardware Error |
| DTC C1611 | CAN Time-out ECM |
| DTC C1616 | CAN Bus Off |
| DTC C1622 | EMS invalid vehicle speed |
| DTC C1692 | CAN Time-out VSM |
| DTC C1693 | CAN Signal Error VSM |
| DTC C1700 | Byte Coding Error |
| DTC C1702 | Variant Coding Error |
| DTC C1704 | ECU Fail-Safe Relay Fail |
| DTC C1705 | ECU Precharge Circuit Fault |
| DTC C2400 | Motor Fault - Motor Not Running |
| DTC C2401 | Motor circuit |
| DTC C2412 | Motor Short or Open |
| DTC C2413 | Motor current fail (current over) |