Repair procedures

Replacement

CAUTION:
- Be careful not to damage the fender and body.
- When removing the clips, use a clip remover.

1. Remove the head lamps.

2. Loosen the mud guard mounting screws.




3. After loosening the mounting screws and clips, then remove the side sill molding (A).




4. Using a screwdriver or remover, remove the fender garnish (A).




5. Detach the clips and then remove the fender side cover (A).




6. Using a screwdriver or remover, remove the delta garnish (A).




7. After loosening the mounting screws and bolt, then remove the front bumper side mounting bracket (A).




8. After loosening the fender mounting bolts and nut, then remove the fender (A).




9. Installation is the reverse of removal.