Removal and Installation

Disconnect the negative cable (A) from the battery.
Tightening torque:

3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)

Fig 1: Identifying Battery Negative Cable
Courtesy of HYUNDAI MOTOR AMERICA
Remove the engine room cover (A), engine cover (B) and radiator grill upper cover (C).

Fig 2: Identifying Engine Room Cover And Radiator Grill Upper Cover
Courtesy of HYUNDAI MOTOR AMERICA
Remove the air cleaner assembly.
1. Remove the air duct (A).
2. Disconnect the breather hose (B).
3. Loosen the clamp (C) and then disconnect the air intake hose from the throttle body.
  Tightening torque:
  
  2.9 ~ 4.9N.m (0.3 ~ 0.5kgf.m, 2.2 ~ 3.6lb-ft)
4. Remove the chamber air cleaner (D) and air cleaner assembly (E).
  Tightening torque
  
  Air cleaner assembly bolts:
  
  7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lb-ft)
  
  Fig 3: Identifying Air Cleaner Assembly, Breather Hose, Air Duct
  Courtesy of HYUNDAI MOTOR AMERICA
Using the wrench turn the tensioner (B) counter clockwise and loosen. Then remove the drive belt (A).

Fig 4: Removing Drive Belt
Courtesy of HYUNDAI MOTOR AMERICA
Remove the oil level gauge (A).
Tightening torque:

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 5: Identifying Oil Level Gauge
Courtesy of HYUNDAI MOTOR AMERICA
Remove the alternator.
1. Disconnect the alternator connector (A) and cable (B) from the 'B' terminal.
  
  Fig 6: Identifying Alternator Connector And Cable
  Courtesy of HYUNDAI MOTOR AMERICA
2. Loosen the alternator mounting bolts (A) and then remove alternator from the vehicle.
  Tightening torque:
  
  29.4 ~ 41.2 N.m (3.0 ~ 4.2 kgf.m, 21.7 ~ 30.4 lb-ft)
  
  Fig 7: Identifying Alternator Mounting Bolts
  Courtesy of HYUNDAI MOTOR AMERICA
Installation is reverse order of removal.