Repair Procedures: Adjustment

Select cable adjustment 

1. Remove the select cable snap pin (A) and then remove the select cable (B) from the shift lever pin.
   Fig 1: Select Cable & Snap Pin

   Courtesy of HYUNDAI MOTOR AMERICA
2. Shift the shift lever to 3rd gear.
3. Move the slide clip (B) of guide member (A) in the direction as shown in the illustration.
   Fig 2: Moving Guide Member Slide Clip

   Courtesy of HYUNDAI MOTOR AMERICA
4. Install the select cable (A).
   Fig 3: Select Cable

   Courtesy of HYUNDAI MOTOR AMERICA
5. Insert the clip in the direction as shown in the illustration and then install the snap pin (B).
   Fig 4: Inserting Clip

   Courtesy of HYUNDAI MOTOR AMERICA