Repair Procedures: Removal

Remove the floor console.
(Refer to CONSOLE .
Disconnect the shift cable (A).

Fig 1: Disconnecting Shift Cable
Courtesy of HYUNDAI MOTOR AMERICA
Remove the retainer (A) and nut (B).
Tightening torque:

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

Fig 2: Identifying Retainer And Nut
Courtesy of HYUNDAI MOTOR AMERICA
Remove the nut (C) from the manual control lever.
Tightening torque:

14.7 ~ 21.6 N.m (1.5 ~ 2.2 kgf.m, 10.9 ~ 15.9 lb-ft)
Remove the cable (B) from the bracket (A) at transaxle assembly side.
Remove the shift cable by pulling it toward the interior.

Fig 3: Removing Shift Cable
Courtesy of HYUNDAI MOTOR AMERICA