Trunk lid open switch

Disconnect the negative (-) battery terminal.
Remove the trunk door trim. (Refer to "TRUNK TRIM ")
Disconnect the trunk lid open switch connector (A).

Fig 1: Identifying Trunk Lid Open Switch Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the rear combination lamp assembly (A) after loosening the nuts (9EA).
NOTE: Be careful not to damage the guide boss on the combination lamp assembly.

Fig 2: Identifying Rear Combination Lamp Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Remove the outside handle assembly (A) after removing the mounting screws and license lamps.

Fig 3: Identifying Outside Handle Assembly And Mounting Screws
Courtesy of HYUNDAI MOTOR AMERICA

Fig 4: Identifying Outside Handle Assembly
Courtesy of HYUNDAI MOTOR AMERICA