Repair Procedures: Removal

Remove the lower oil pan.
(Refer to Lubrication System - "OIL PAN ")
Remove the oil pump chain cover (A).
Tightening torque: 9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)

Fig 1: Identifying Oil Pump Chain Cover
Courtesy of HYUNDAI MOTOR AMERICA
Remove the bolt (A) and then separate the chain with sprocket from the oil pump.
Tightening torque: 18.6 ~ 21.6N.m (1.9 ~ 2.2kgf.m, 13.7 ~ 15.9lb-ft)

Fig 2: Identifying Mounting Bolt
Courtesy of HYUNDAI MOTOR AMERICA
Remove the oil pump (A).
Tightening torque: 20.6 ~ 22.6N.m (2.1 ~ 2.3kgf.m, 15.2 ~ 16.6lb-ft)

Fig 3: Identifying Oil Pump
Courtesy of HYUNDAI MOTOR AMERICA

NOTE: When installing, use a new O-ring.
Install in the reverse order of removal.