LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2014 >> Equus Signature >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> ETC (Electronic Throttle Control) System >> Repair procedures >> Inspection >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Inspection: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose (Refer to INTAKE & EXHAUST SYSTEM .
  3. Disconnect the ETC module connector (A).
  4. Remove the installation bolts (B), and then remove the ETC module (C) from the engine.
    Fig 1: Identifying ETC Module, Connector And Bolts
    G09789354Courtesy of HYUNDAI MOTOR AMERICA