Shift Lever Assembly Replacement

Remove the center console.
(Refer to "INTERIOR (CONSOLE) ")
Disconnect the connector (A).

Fig 1: Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the control cable (B).

Fig 2: Control Cable
Courtesy of HYUNDAI MOTOR AMERICA
Remove the shift lock cable (C) and key lock cable (B) by removing the nuts (A-2ea).
Tightening torque:

9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)

Fig 3: Shift Lock Cable, Key Lock Cable And Nuts
Courtesy of HYUNDAI MOTOR AMERICA
Remove the shift lever assembly (A) by removing the bolts (B-4ea).
Tightening torque:

9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)

Fig 4: Shift Lever Assembly And Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.

NOTE: Make sure vehicle does not roll before setting room side shift lever and T/M side manual control lever to "N" position.