LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2015 >> Azera Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Accelerator Position Sensor (APS) >> Repair procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
    Fig 1: Accelerator Position Sensor Connector
    G10367471Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the installation bolt (B) and nuts (C), and the remove the accelerator pedal module.
    Fig 2: Accelerator Pedal Module Installation Bolt
    G10367472Courtesy of HYUNDAI MOTOR AMERICA
    Fig 3: Accelerator Pedal Module Nuts
    G10367473Courtesy of HYUNDAI MOTOR AMERICA