LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2015 >> Azera Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Injector Drive Box (IDB) >> Repair procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Removal

  1. Turn the ignition switch off and disconnect the battery negative (-) cable.
  2. Disconnect the injector drive box (IDB) connector (A).
    Fig 1: Injector Drive Box (IDB) Connector
    G10367407Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the air cleaner assembly.

    (Refer to "AIR CLEANER ")

  4. Remove the main wiring harness (B) after removing the nut (A).
    Fig 2: Main Wiring Harness And Nut
    G10367408Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the IDB bracket assembly (B) after removing the bolts (A).
    Fig 3: IDB Bracket Assembly Bolts
    G10367409Courtesy of HYUNDAI MOTOR AMERICA
  6. After removing the installation bolts (A), remove the IDB from the bracket.
    Fig 4: IDB Bracket Installation Bolts
    G10367410Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals