Repair procedures: Removal

Remove the center console assembly.
(Refer to "FLOOR CONSOLE ")
Remove the duct (A).

Fig 1: Center Console Assembly Duct
Courtesy of HYUNDAI MOTOR AMERICA
Remove the control cable (B).

Fig 2: Control Cable
Courtesy of HYUNDAI MOTOR AMERICA
Remove the control cable assembly in the vehicle after removing the nuts (B) and the retainer (A).
Tightening torque:

9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.9 lb-ft)

Fig 3: Removing Control Cable Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Remove the nut (C).
Remove the cable (B) from the bracket (A) at transaxle assembly side.
(Refer to "AUTOMATIC TRANSAXLE ")

Fig 4: Transaxle Assembly, Cable And Bracket
Courtesy of HYUNDAI MOTOR AMERICA
Remove the control cable inside of cab.