Repair procedures: Removal

Remove the automatic transaxle assembly.
(Refer to "AUTOMATIC TRANSAXLE ")
Remove the air breeder hose (A).
Remove the valve body cover (B).
Tightening torque:

12.8 ~ 14.7 N.m (1.3 ~ 1.5 kgf.m, 9.4 ~ 10.9 lb-ft)

Fig 1: Valve Body Cover And Air Breeder Hose
Courtesy of HYUNDAI MOTOR AMERICA
Remove the bolt (3ea) after disconnecting the solenoid valve connector (B) and the oil temperature sensor connector (A).
Tightening torque:

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 2: Solenoid Valve Connector And Oil Temperature Sensor Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the solenoid valve support bracket (B) and the valve body mounting bolt (A-1ea).
Tightening torque:

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 3: Valve Body Mounting Bolt
Courtesy of HYUNDAI MOTOR AMERICA
Remove the torque converter control solenoid valve (A).

Fig 4: Torque Converter Control Solenoid Valve
Courtesy of HYUNDAI MOTOR AMERICA