LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2015 >> Genesis 5.0 >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows >> Power Window Switch >> Repair procedures >> Removal >> Assist Power Window Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Assist Power Window Switch

CAUTION:
  • Wrap the protective tape on the tool to disassemble with the screwdriver or remover.
  • Use caution in keeping and handling during disassembling/assembling because it is easily contaminated with lubricant and oil.
  • Use caution for the crash pad garnish and door trim upper garnish made of timber (Real wood) because they can be scratched or picked.
  • Be careful not to scratch the door trim and other parts.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the front door trim panel.
  3. Disconnect the ADM (Assist Door Module) connector (A) from the wiring harness.
    Fig 1: Assist Door Module Connectors
    G10454476Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the obstacle trim (A) after loosening the mounting screws.
    Fig 2: Obstacle Trim With Mounting Screws
    G10454477Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the ADM (Assist Door Module) (A) after loosening the mounting screws.
Fig 3: Assist Door Module Mounting Screws
G10454478Courtesy of HYUNDAI MOTOR AMERICA
Fig 4: Assist Door Module
G10454479Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals