LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2015 >> Veloster Turbo, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L T-GDI >> Knock Sensor (KS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Cable.
  2. Remove the Intake Manifold (Refer to: "Intake And Exhaust System" in EM procedure).
  3. Disconnect the Injector Connector (A).
  4. Remove the Installation Bolt (B), and then remove the sensor from the Cylinder Block.
Fig 1: Injector Connector And Installation Bolt Location
G10604568Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals