LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Azera Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Rear Window Glass >> Repair Procedures >> Replacement >> [Removal]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Replacement: [Removal]

CAUTION:
  • Put on gloves to protect your hands.
  • Use seat covers to avoid damaging any surfaces.
  1. Remove the roof side molding.

    (Refer to "ROOF SIDE MOLDINGS ")

  2. Remove the rear package tray trim.

    (Refer to "REAR PACKAGE TRAY TRIM ")

  3. Disconnect the rear window glass defogger connector.
  4. Spread the WD-40 on the side of rear window glass.
  5. Using masking tape create some alignment marks (C) to aid in reinstallation.
    Fig 1: Alignment Marks (C)
    G10368594Courtesy of HYUNDAI MOTOR AMERICA
  6. Cut out the adhesive using the cutter (A).
    NOTE:
    • Please use the cutter with a blade length between 8-12 inches.
    Fig 2: Cutting Out Adhesive Using Cutter
    G10368585Courtesy of HYUNDAI MOTOR AMERICA
  7. Enough on the upper (A) and lower (B) side (C) of rear window glass. and then cut out the adhesive using the cutter tool (09861-31100).
    Fig 3: Removing Rear Window Glass
    G10368586Courtesy of HYUNDAI MOTOR AMERICA
  8. Remove the rear window glass (A).
    NOTE:
    • When removing and installing the rear window glass, an assistant is necessary.
    Fig 4: Rear Window Glass
    G10368587Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals