Repair procedures: Installation

Install the oil pump (A).
Tightening torque:

20.6 ~ 22.6 N.m (2.1 ~ 2.3 kgf.m, 15.2 ~ 16.6 lb-ft)

Fig 1: Oil Pump
Courtesy of HYUNDAI MOTOR AMERICA

NOTE: Always use a new O-ring.
Install the oil pump sprocket and the oil pump chain on the oil pump, and tighten the sprocket bolt (A).
Tightening torque:

18.6 ~ 21.6 N.m (1.9 ~ 2.2 kgf.m, 13.7 ~ 15.9 lb-ft)

Fig 2: Oil Pump Sprocket Bolt
Courtesy of HYUNDAI MOTOR AMERICA
Install the oil pump chain cover (A).
Tightening torque:

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 3: Oil Pump Chain Cover
Courtesy of HYUNDAI MOTOR AMERICA
Install the lower oil pan.
(Refer to "OIL PAN ")
After assembly, wait at least 30 minutes before filling the engine with oil.