Repair procedures: Removal

[CVVT Oil Control Valve (Intake)] 

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2. Remove the intake manifold.

   (Refer to "INTAKE MANIFOLD ")

3. Disconnect the CVVT oil control valve connector (A).
4. Remove the installation bolt (B), and then remove the valve from the engine.

   [Bank 1] 

   Fig 1: CVVT Oil Control Valve Connector And Installation Bolt (Bank 1)

   Courtesy of HYUNDAI MOTOR AMERICA

   [Bank 2] 

   Fig 2: CVVT Oil Control Valve Connector And Installation Bolt (Bank 2)

   Courtesy of HYUNDAI MOTOR AMERICA

[CVVT Oil Control Valve (Exhaust)] 

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2. Disconnect the CVVT oil control valve connector (A).

   [Bank 1] 

   Fig 3: CVVT Oil Control Valve Connector (Bank 1)

   Courtesy of HYUNDAI MOTOR AMERICA

   [Bank 2] 

   Fig 4: CVVT Oil Control Valve Connector (Bank 2)

   Courtesy of HYUNDAI MOTOR AMERICA
3. Remove the cylinder head cover.

   (Refer to "CYLINDER HEAD COVER ")

4. Remove the installation bolt (A), and then remove the valve from the engine.

   [Bank 1] 

   Fig 5: Valve Engine Installation Bolt (Bank 1)

   Courtesy of HYUNDAI MOTOR AMERICA

   [Bank 2] 

   Fig 6: Valve Engine Installation Bolt (Bank 2)

   Courtesy of HYUNDAI MOTOR AMERICA