Engine Control/Fuel System - General Information: Specifications: Sensors
Barometric Pressure Sensor (BPS)
- Type: Piezo-resistive pressure sensor
- Specification
| Pressure [kPa (kgf/cm2
, psi)] |
Output Voltage (V) |
| 10.0 (0.01, 0.15) |
0.50 |
| 55.0 (0.56, 7.98) |
2.21 |
| 100.0 (1.01, 14.5) |
3.93 |
| 115.0 (1.17, 16.9) |
4.50 |
Intake Air Temperature Sensor (IATS)
- Type: Thermistor type
- Specification
| Temperature |
Resistance (kΩ) |
| °C |
°F |
| -40 |
-40 |
40.93 ~ 48.35 |
| -20 |
-4 |
13.89 ~ 16.03 |
| 0 |
32 |
5.38 ~ 6.09 |
| 10 |
50 |
3.48 ~ 3.90 |
| 20 |
68 |
2.31 ~ 2.57 |
| 40 |
104 |
1.08 ~ 1.21 |
| 60 |
140 |
0.54 ~ 0.66 |
| 80 |
176 |
0.29 ~ 0.34 |
Manifold Absolute Pressure Sensor (MAPS)
- Type: Piezo-resistive pressure sensor
- Specification
| Pressure [kPa (kgf/cm2
, psi)] |
Output Voltage (V) |
| 20.0 (0.20, 2.90) |
0.79 |
| 46.66 (0.47, 6.77) |
1.84 |
| 101.32 (1.03, 14.7) |
4.0 |
Engine Coolant Temperature Sensor (ECTS)
- Type: Thermistor type
- Specification
| Temperature |
Resistance (kΩ) |
| °C |
°F |
| -40 |
-40 |
48.14 |
| -20 |
-4 |
14.13 ~ 16.83 |
| 0 |
32 |
5.79 |
| 20 |
68 |
2.31 ~ 2.59 |
| 40 |
104 |
1.15 |
| 60 |
140 |
0.59 |
| 80 |
176 |
0.32 |
Throttle Position Sensor (TPS) [integrated into ETC module]
- Type: Hall IC Non-contact sensor type
- Specification
| Throttle angle(°) |
Output Voltage (V) |
| TPS1 |
TPS2 |
| 0 |
0.5 |
4.5 |
| 10 |
0.96 |
4.05 |
| 20 |
1.41 |
3.59 |
| 30 |
1.87 |
3.14 |
| 40 |
2.32 |
2.68 |
| 50 |
2.78 |
2.23 |
| 60 |
3.23 |
1.77 |
| 70 |
3.69 |
1.32 |
| 80 |
4.14 |
0.86 |
| 90 |
4.6 |
0.41 |
| 98 |
4.65 |
0.35 |
| C.T (0) |
0.5 |
4.5 |
| W.O.T (86) |
4.41 |
0.59 |
Crankshaft Position Sensor (CKPS)
- Type: Magnetic field sensitive sensor
- Specification
| Item |
Specification |
| Coil Resistance (Ω) |
774 ~ 946 [20°C(68°F)] |
| Air Gap (mm) |
0.5 ~ 1.5 |
Camshaft Position Sensor (CMPS)
- Type: Hall effect type
- Specification
| Item |
Specification |
| Output Voltage (V) |
High: 5.0V |
| Low: 0.7V |
| Air Gap (mm) |
0.5 ~ 1.5 |
Knock Sensor (KS)
- Type: Piezo-electricity type
- Specification
| Item |
Specification |
| Capacitance (pF) |
950 ~ 1, 350 |
| Resistance (MΩ) |
4.87 |
Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 1, Bank 2/Sensor 1]
- Type: Zirconia (ZrO2) [Binary] Type
- Specification
| A/F Ratio (λ) |
Output Voltage(V) |
| RICH |
0.6 ~ 1.0 |
| LEAN |
0 ~ 0.4 |
| Item |
Specification |
| Heater Resistance (Ω) |
about 9.0 [20°C(68°F)] |
Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 2, Bank 2/Sensor 2]
- Type: Zirconia (ZrO2) [Binary] Type
- Specification
| A/F Ratio (λ) |
Output Voltage(V) |
| RICH |
Min. 0.8 |
| LEAN |
Max. 0.1 |
| Item |
Specification |
| Heater Resistance (Ω) |
3.3 ~ 4.1[20°C(68°F)] |
Rail Pressure Sensor (RPS)
- Type: Piezo-electricity type
- Specification
Courtesy of HYUNDAI MOTOR AMERICA
CVVT Oil Temperature Sensor (OTS)
- Type: Thermistor type
- Specification
| Temperature |
Resistance (kΩ) |
| °C |
°F |
| -40 |
-40 |
52.15 |
| -20 |
-4 |
16.52 |
| 0 |
32 |
6.0 |
| 20 |
68 |
2.45 |
| 40 |
104 |
1.11 |
| 60 |
140 |
0.54 |
| 80 |
176 |
0.29 |
Accelerator Position Sensor (APS)
- Type: Variable resistor type
- Specification
| Accelerator Position |
Output Voltage (V) |
| APS1 |
APS2 |
| C.T |
0.7 ~ 0.8 |
0.29 ~ 0.46 |
| W.O.T |
3.85 ~ 4.35 |
1.93 ~ 2.18 |
Fuel Tank Pressure Sensor (FTPS)
- Type: Piezo - Resistivity type
- Specification
| Pressure [kPa (kgf/cm2
, psi)] |
Output Voltage (V) |
| -6.67 (-0.06, -0.97) |
0.5 |
| 0 |
2.5 |
| +6.67 (0.068, 0.97) |
4.5 |