LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Azera Base >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Filler-Neck Assembly >> Repair procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Removal

  1. Lift the vehicle.
  2. Disconnect the fuel filler hose (A).
  3. Disconnect the ventilation hose (B) from the fuel tank air filter.
    Fig 1: Ventilation And Fuel Filler Hose
    G10367571Courtesy of HYUNDAI MOTOR AMERICA
  4. Open the fuel filler door and then remove the filler-neck installation screw (A).
    Fig 2: Fuel Filler Door Filler-Neck Installation Screw
    G10367572Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the rear-LH wheel, tire, and the inner wheel house (A).
    Fig 3: Rear-LH Wheel, Tire And Inner Wheel House
    G10367573Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the filler-neck assembly from the vehicle after removing the bracket installation bolt (A).
Fig 4: Filler-Neck Assembly Installation Bolt
G10367574Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals