Repair procedures: Removal

Remove the fuel pump.
(Refer to "FUEL PUMP ")
Disconnect the electric pump wiring connector (A) and the fuel sender connector (B).

Fig 1: Electric Pump Wiring Connector And Fuel Sender Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the cushion pipe fixing clip (A), and then separate the head assembly (B) from reservoir cup.

Fig 2: Cushion Pipe Fixing Clip And Head Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Remove the return nozzle (B) after releasing the fixing hook (A).

Fig 3: Return Nozzle And Fixing Hook
Courtesy of HYUNDAI MOTOR AMERICA
Remove the reservoir-cup (B) after releasing the fixing hooks (A).

Fig 4: Reservoir-Cup And Fixing Hooks
Courtesy of HYUNDAI MOTOR AMERICA
Remove the pre-filter (C) after releasing the fixing hooks (A, B)

Fig 5: Pre-Filter And Fixing Hooks
Courtesy of HYUNDAI MOTOR AMERICA

CAUTION: Be careful of O-ring.
Remove the fuel pressure regulator (A) in the direction.

Fig 6: Removing Fuel Pressure Regulator
Courtesy of HYUNDAI MOTOR AMERICA

Fig 7: Fuel Pressure Regulator

Courtesy of HYUNDAI MOTOR AMERICA