LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Azera Base >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Fuel Tank >> Repair procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Removal

  1. Release the residual pressure in fuel line.

    (Refer to "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")

  2. Remove the fuel pump service cover (A) in the trunk.
    Fig 1: Fuel Pump Service Cover
    G10367518Courtesy of HYUNDAI MOTOR AMERICA
  3. Disconnect the fuel pump connector (A) and the fuel tank pressure sensor connector (B).
  4. Disconnect the fuel feed tube quick connector (C).
    Fig 2: Fuel Pump Connector And Fuel Feed Tube Quick Connector
    G10367519Courtesy of HYUNDAI MOTOR AMERICA
  5. Lift the vehicle and support the fuel tank with a jack.
  6. Remove the center muffler assembly.

    (Refer to "CENTER MUFFLER ")

  7. Disconnect the fuel filler hose (A).
    Fig 3: Fuel Filler Hose
    G10367520Courtesy of HYUNDAI MOTOR AMERICA
  8. Disconnect the vapor hose quick-connector (A).
    Fig 4: Vapor Hose Quick-Connector
    G10367521Courtesy of HYUNDAI MOTOR AMERICA
  9. Remove the parking brake line (A).
    Fig 5: Identifying Parking Brake Line
    G10367522Courtesy of HYUNDAI MOTOR AMERICA
  10. Remove the fuel tank band installation nuts (A).
    Fig 6: Fuel Tank Band Installation Nuts
    G10367523Courtesy of HYUNDAI MOTOR AMERICA
  11. Remove the fuel tank after removing the fuel tank band (A) as in illustration below.
    Fig 7: Fuel Tank Band
    G10367524Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals