LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Elantra Value Edition >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.8L >> Canister Close Valve (CCV) >> Repair procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Lift the vehicle.
  3. Disconnect the canister close valve connector (A).
  4. Disconnect the ventilation tube quick-connector (B) from the fuel tank air filter and canister close valve.
    Fig 1: Identifying Ventilation Tube Quick-Connector
    G10537727Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the fuel tank air filter and canister close valve assembly (A) after rotating it as below.
    Fig 2: Identifying Fuel Tank Air Filter And Canister Close Valve Assembly
    G10537728Courtesy of HYUNDAI MOTOR AMERICA
    Fig 3: Rotating Fuel Tank Air Filter And Canister Close Valve Assembly
    G10537729Courtesy of HYUNDAI MOTOR AMERICA
  6. Release the lever (A), and then separate the canister close valve (B) from the fuel tank air filter (C) after rotating it in the direction of the arrow in the figure.
    Fig 4: Identifying Canister Close Valve And Fuel Tank Air Filter
    G10537730Courtesy of HYUNDAI MOTOR AMERICA
    Fig 5: Rotating Canister Close Valve From Fuel Tank Air Filter
    G10537731Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals