LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Elantra Value Edition >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.8L >> Engine Control Module (ECM) >> Repair procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Removal

NOTE: In the case of the vehicle equipped with immobilizer or button engine start system, perform "Key Teaching" procedure together (Refer to "Immobilizer " or "BUTTON ENGINE START SYSTEM " in BE group).
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the ECM Connector (A).
    Fig 1: Identifying ECM Connector
    G10537643Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the battery (Refer to "CHARGING SYSTEM " in EE group).
  4. Remove the mounting bolts (A) and a nut (B), and then remove the ECM (C).
    Fig 2: Identifying ECM Mounting Bolts And Nut
    G10537644Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals