LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Equus Signature >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Fuel Line >> Repair procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Removal

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Release the residual pressure in fuel line.

    (Refer to "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")

  3. Disconnect the fuel pressure control valve connector (A) and the fuel feed tube quick-connector (B).
    Fig 1: Fuel Pressure Control Valve Connector And Fuel Feed Tube Quick-Connector
    G10382769Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the vapor hose (A) which is connected from the PCSV.
    Fig 2: PCSV Vapor Hose
    G10382770Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the fuel tank.

    (Refer to "FUEL TANK ")

  6. Remove the mounting nuts (A) and then, remove the fuel & brake line protector (B).
    Fig 3: Mounting Nuts, Fuel And Brake Line Protector
    G10382771Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the mounting nuts (A).
  8. Remove the vapor tube line fixing clip (B) by using a common driver.
    Fig 4: Vapor Tube Line Fixing Clip And Mounting Nuts
    G10382772Courtesy of HYUNDAI MOTOR AMERICA
  9. Remove the mounting bolt.
  10. Remove the vapor tube and fuel tube line fixing clip (A) by using a common driver.
    Fig 5: Fuel Tube Line Fixing Clip
    G10382773Courtesy of HYUNDAI MOTOR AMERICA
    Fig 6: Fuel Tube Line Mounting Bolts
    G10382774Courtesy of HYUNDAI MOTOR AMERICA
  11. Remove the fuel line (A).
Fig 7: Fuel Line
G10382775Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals