Repair procedures: Adjustment

How To Adjust Shift Cable 

1. Insert the shift cable to the bracket and hold it with a new clip.
2. Align the manual lever hole to the hole on the transmission case and hold the position with a bar.
3. Eliminate shift cable free play of the shift cable.
4. Firmly hold the special bolt with a spanner and tighten the nut (A) with the specified torque.

   Tightening torque: 

   12.7 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11.6 lb-ft)

   Fig 1: Aligning Manual Lever Hole To Transmission Case Hole

   Courtesy of HYUNDAI MOTOR AMERICA
5. Take off the bar holding the manual lever.
6. Shifting the each position, check that the shift lever moves smoothly.