LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Genesis 5.0 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 5.0L >> Camshaft Position Sensor (CMPS) >> Repair procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Removal

WARNING:
  • DON'T remove the camshaft position sensor while the engine is running or right after engine is turned off. The part and engine oil is hot and can cause burns.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the cowl top cover.

    (Refer to "COWL TOP COVER ")

  3. Remove the noise barrier (A).
    Fig 1: Noise Barrier
    G10465253Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the camshaft position sensor connector (A).
  5. Remove the installation bolt (B), and then remove the sensor.

    Bank 1/Intake 

    Fig 2: Camshaft Position Sensor Connector And Mounting Bolt (Bank 1/Intake)
    G10465254Courtesy of HYUNDAI MOTOR AMERICA

    Bank 1/Exhaust 

    Fig 3: Camshaft Position Sensor Connector And Mounting Bolt (Bank 1/Exhaust)
    G10465255Courtesy of HYUNDAI MOTOR AMERICA

    Bank 2/Intake 

    Fig 4: Camshaft Position Sensor Connector And Mounting Bolt (Bank 2/Intake)
    G10465256Courtesy of HYUNDAI MOTOR AMERICA

    Bank 2/Exhaust 

    Fig 5: Camshaft Position Sensor Connector And Mounting Bolt (Bank 2/Exhaust)
    G10465257Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals