LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Genesis 5.0 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 5.0L >> Injector Drive Box (IDB) >> Repair procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Removal

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the ECM & TCM & IDB cover (A).
    Fig 1: ECM, TCM And IDB Cover
    G10465219Courtesy of HYUNDAI MOTOR AMERICA
  3. Disconnect the ECM connector (A), and then disconnect the IDB connector (B) and the TCM connector (C).
    Fig 2: ECM, TCM And IDB Connectors
    G10465220Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the ECM & TCM & IDB bracket installation bolts (A) and nut (B).
    Fig 3: ECM, TCM And IDB Bracket Installation Bolts And Nut
    G10465221Courtesy of HYUNDAI MOTOR AMERICA
  5. After removing the installation bolts (A), remove the TCM (B) from the bracket.
    Fig 4: TCM Mounting Bolts
    G10465222Courtesy of HYUNDAI MOTOR AMERICA
  6. After removing the installation nuts (A), remove the IDB (B) from the bracket.
    Fig 5: IDB Mounting Nuts
    G10465223Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals