Repair procedures: Removal

Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the cover (A).

Fig 1: Cover
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the ECM connector (A), TCM connector (B) and IDB connector (C).

Fig 2: ECM, TCM And IDB Connectors
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: ECM Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the TCM & ECM & IDB after removing the bolts (A) and nut (B).
Tightening torque:

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 4: ECM And TCM Bolts And Nut
Courtesy of HYUNDAI MOTOR AMERICA
Remove the TCM (B) after removing the nuts (A).

Fig 5: TCM And Mounting Nuts
Courtesy of HYUNDAI MOTOR AMERICA