LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Veloster Base, Automatic DCT Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L GDI >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Cable.
  2. Remove the resonator and the Air Intake Hose (Refer to: "Intake And Exhaust System" in EM procedure).
  3. Disconnect the ETC Module Connector (A).
    Fig 1: ETC Module Connector Location
    G10607913Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the installation Bolts, and then remove the ETC Module (A) from the Engine.
    Fig 2: ETC Module Installation Bolts
    G10607914Courtesy of HYUNDAI MOTOR AMERICA