Repair Procedures: Installation
CAUTION:
- Install the component with the Specified Torques.
- Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
CAUTION:
- Apply the Engine Coolant to the O-Ring.
CAUTION:
- Insert the sensor in the Installation Hole and be careful not to damage.
- Install in the reverse order of removal.
Engine Coolant Temperature Sensor Installation:
19.6 ~ 39.2 N.m (2.0 ~ 4.0 kgf.m, 14.4 ~ 28.9 lb-ft)