LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Veloster Base, Automatic DCT Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L GDI >> Intake Air Temperature Sensor (IATS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Cable.
  2. Disconnect the Manifold Absolute Pressure Sensor Connector (A).
  3. Remove the Installation Bolt (B) and then remove the Sensor from the Surge Tank.
    4. Fig 1: Manifold Absolute Pressure Sensor Connector Installation Bolt
    G00561512Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals