LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows >> Power Window Switch >> Repair Procedures >> Passenger Power Window Switch Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Passenger Power Window Switch Inspection

  1. Disconnect the Negative (-) Battery Terminal.
  2. Remove the Front Door Trim Panel.

    (Refer to: the BD procedure - "FRONT DOOR ").

  3. Disconnect the connector from the switch.
    Fig 1: Passenger Power Window Switch Connector Terminal (1 Of 2)
    G10605927Courtesy of HYUNDAI MOTOR AMERICA
  4. Check for continuity between the Terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.
    Fig 2: Passenger Power Window Switch Terminal Continuity Chart (2 Of 2)
    G10605928Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the Power Window Switch after loosening 2 Screws.
scientia non olet · About LEMON Manuals