Repair Procedures: Installation
CAUTION:
- Install the component with the Specified Torques.
- Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
CAUTION:
- Apply the Engine Oil to the O-Ring.
CAUTION:
- Insert the sensor in the Installation Hole and be careful not to damage.
- Install in the reverse order of removal.
Crankshaft Position Sensor Installation Bolt:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)