Repair Procedures: Removal
WARNING:
In case of removing the High Pressure Fuel Pump, High Pressure Fuel Pipe, Delivery Pipe and Injector; There may be injury caused by leakage of the High Pressure Fuel. So don't do any repair work right after Engine stops.
- Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Cable.
- Release the Residual Pressure in Fuel Line (Refer to: "RELEASE RESIDUAL PRESSURE IN FUEL LINE
" in this procedure).CAUTION: When removing the Fuel Pump Relay, a Diagnostic Trouble Code (DTC) may occur. Delete the code with the GDS after completion of "Release Residual Pressure in Fuel Line" work.
- Remove the Delivery Pipe & Injector Assembly (Refer to: "DELIVERY PIPE " in this procedure).
- Remove the connector (A) and the Fixing Clip (B), and then separate the Injector from the Delivery Pipe.