Shift Lever Assembly Replacement

Remove the center console.
(Refer to CONSOLE )
Disconnect the connector (A).

Courtesy of HYUNDAI MOTOR AMERICA
Remove the control cable (B).

Courtesy of HYUNDAI MOTOR AMERICA
Remove the shift lock cable (C) and key lock cable (B) by removing the nuts (A-2ea).
Tightening torque:

9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)

Courtesy of HYUNDAI MOTOR AMERICA
Remove the shift lever assembly (A) by removing the bolts (B-4ea).
Tightening torque:

9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)

Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.
NOTE: Make sure vehicle does not roll before setting room side shift lever and T/M side manual control lever to "N" position.