Repair Procedures: Replacement

Remove the front door window glass.
(Refer to Front Door - "Front Door Window Glass ")
Remove the front door outside handle.
(Refer to Front Door - "Front Door Outside Handle ")
Loosen the mounting bolt (A).

Fig 1: Locating Front Door Outside Handle Mounting Bolt
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the front door module mounting bolts, then remove the front door module (A).
Tightening torque:

6.9~10.8 N.m (0.7~1.1 kgf.m, 5.1~8.0 lb-ft)

Fig 2: Locating Front Door Module With Mounting Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the connectors and front door module wiring harness (A).

Fig 3: Locating Front Door Module Wiring Harness With Connectors
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.
NOTE:
- The area of whole parts should be applied with sufficient grease.
- Make sure connectors are connected properly and each rod is connected securely.
- Make sure the door locks/unlocks and opens/closes properly.