Repair Procedures: Installation

Install the oil pump (A).
Tightening torque:

20.6 ~ 22.6 N.m (2.1 ~ 2.3 kgf.m, 15.2 ~ 16.6 lb-ft)

Fig 1: Installing Oil Pump
Courtesy of HYUNDAI MOTOR AMERICA

NOTE: Always use a new O-ring.
Install the oil pump sprocket and the oil pump chain on the oil pump, and tighten the sprocket bolt (A).
Tightening torque:

18.6 ~ 21.6 N.m (1.9 ~ 2.2 kgf.m, 13.7 ~ 15.9 lb-ft)

Fig 2: Locating Sprocket Bolt
Courtesy of HYUNDAI MOTOR AMERICA
Install the oil pump chain cover (A).
Tightening torque:

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 3: Installing Oil Pump Chain Cover
Courtesy of HYUNDAI MOTOR AMERICA
Install the lower oil pan.
(Refer to Lubrication System - "Oil Pan ")
After assembly, wait at least 30 minutes before filling the engine with oil.