Repair Procedures: Removal

Remove the lower oil pan.
(Refer to Lubrication System - "Oil Pan ")
Remove the oil pump chain cover (A).
Tightening torque:

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 1: Removing Oil Pump Chain Cover
Courtesy of HYUNDAI MOTOR AMERICA
Remove the bolt (A) and then separate the chain with sprocket from the oil pump.
Tightening torque:

18.6 ~ 21.6 N.m (1.9 ~ 2.2 kgf.m, 13.7 ~ 15.9 lb-ft)

Fig 2: Separating Chain With Sprocket From Oil Pump
Courtesy of HYUNDAI MOTOR AMERICA
Remove the oil pump (A).
Tightening torque:

20.6 ~ 22.6 N.m (2.1 ~ 2.3 kgf.m, 15.2 ~ 16.6 lb-ft)

Fig 3: Removing Oil Pump
Courtesy of HYUNDAI MOTOR AMERICA

NOTE: When installing, use a new O-ring.
Install in the reverse order of removal.