LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Azera Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Timing System >> Timing Chain Cover >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Remove the LH/RH cylinder head cover.

    (Refer to Cylinder Head Assembly - "CYLINDER HEAD COVER ")

  2. Remove the lower oil pan.

    (Refer to Lubrication System - "OIL PAN ")

  3. Remove the drive belt auto tensioner.

    (Refer to Timing System - "Drive Belt Tensioner ")

  4. Remove the crankshaft damper pulley.

    (Refer to Timing System - "Crankshaft Damper Pulley ")

  5. Remove the engine mounting bracket.

    (Refer to Engine And Transmission Assembly - "ENGINE MOUNTING ")

  6. Lift up the engine assembly slightly by using a jack to get access to the side of engine.
  7. Remove the water pump and gasket.

    (Refer to Cooling System - "WATER PUMP ")

  8. Remove the timing chain cover (A).
    Fig 1: Removing Timing Chain Cover
    G12088981Courtesy of HYUNDAI MOTOR AMERICA
    CAUTION: Be careful not to damage the contact surfaces of cylinder block, cylinder head and timing chain cover.
scientia non olet · About LEMON Manuals