LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Azera Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Accelerator Position Sensor (APS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
    Fig 1: Disconnecting Accelerator Position Sensor Connector
    G12088527Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the installation bolt (B) and nuts (C), and the remove the accelerator pedal module.
Fig 2: Locating Accelerator Pedal Module Installation Bolt
G12088528Courtesy of HYUNDAI MOTOR AMERICA
Fig 3: Locating Accelerator Pedal Module Nuts
G12088529Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals