April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal: Installation

CAUTION:

Do not use already used injector fixing clip again.

CAUTION:

Install the component with the specified torques.
Note that internal damage may occur when the component is dropped. In this case, use it after inspecting.

Installation is reverse of removal.
NOTE:
- Use the special service tool [SST No.: 09314-3V100] to install the high pressure fuel pipe.
Fig 1: Special Service Tool (09314-3V100)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: Installing High Pressure Fuel Pipe (1 Of 3)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Installing High Pressure Fuel Pipe (2 Of 3)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 4: Installing High Pressure Fuel Pipe (3 Of 3)
Courtesy of HYUNDAI MOTOR AMERICA

High pressure fuel pipe installation nut:

29.4 ~ 35.3 N.m (3.0 ~ 3.6 kgf.m, 21.7 ~ 26.0 lb-ft)

High pressure pipe bracket installation bolt:

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.74 lb-ft)

High pressure pipe function block installation bolt:

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.74 lb-ft)