LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Azera Base >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Fuel Tank >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Release the residual pressure in fuel line.

    (Refer to Fuel Delivery System - "Release Residual Pressure in Fuel Line ")

  2. Remove the fuel pump service cover (A) in the trunk.
    Fig 1: Removing Fuel Pump Service Cover In Trunk
    G12088574Courtesy of HYUNDAI MOTOR AMERICA
  3. Disconnect the fuel pump connector (A) and the fuel tank pressure sensor connector (B).
  4. Disconnect the fuel feed tube quick connector (C).
    Fig 2: Disconnecting Fuel Pump Connector And Fuel Tank Pressure Sensor Connector
    G12088575Courtesy of HYUNDAI MOTOR AMERICA
  5. Lift the vehicle and support the fuel tank with a jack.
  6. Remove the center muffler assembly.

    (Refer to Engine Mechanical System - "CENTER MUFFLER ")

  7. Disconnect the fuel filler hose (A).
    Fig 3: Disconnecting Fuel Filler Hose
    G12088576Courtesy of HYUNDAI MOTOR AMERICA
  8. Disconnect the vapor hose quick-connector (A).
    Fig 4: Disconnecting Vapor Hose Quick-Connector
    G12088577Courtesy of HYUNDAI MOTOR AMERICA
  9. Remove the parking brake line (A).
    Fig 5: Removing Parking Brake Line
    G12088578Courtesy of HYUNDAI MOTOR AMERICA
  10. Remove the fuel tank band installation nuts (A).
    Fig 6: Removing Fuel Tank Band Installation Nuts
    G12088579Courtesy of HYUNDAI MOTOR AMERICA
  11. Remove the fuel tank after removing the fuel tank band (A) as below.
    Fig 7: Removing Fuel Tank Band
    G12088580Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals