General Information: DTC Detecting Condition

Item		Detecting Condition	Possible cause
DTC Strategy	Case1	Compares the time elapsed recorded by the LPC (Low Power Counter) against that recorded by the test timer	PCM Poor Battery Condition Connecting condition
DTC Strategy	Case2	Checks for abnormal resets of the LPC
Enable Conditions	Case1	Engine running > 10sec. Battery voltage > 8V
Enable Conditions	Case2	No Memory Failure Occurred
Threshold value	Case1	The difference between the counter the LPC and the calibration the test timer clocks up > 20sec.
Threshold value	Case2	The LPC is reset to zero abnormally
Diagnosis Time		-
MIL On Condition		2 Drive Cycles