Repair Procedures: Removal

Remove the center console assembly.
(Refer to Body - "FLOOR CONSOLE ASSEMBLY ")
Remove the duct (A).

Fig 1: Removing Duct
Courtesy of HYUNDAI MOTOR AMERICA
Remove the control cable (B).

Fig 2: Removing Control Cable
Courtesy of HYUNDAI MOTOR AMERICA
Remove the control cable assembly in the vehicle after removing the nuts (B) and the retainer (A).
Tightening torque:

9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.9 lb-ft)

Fig 3: Removing Nuts And Retainer
Courtesy of HYUNDAI MOTOR AMERICA
Remove the nut (C).
Remove the cable (B) from the bracket (A) at transaxle assembly side.
(Refer to Automatic Transaxle System - "AUTOMATIC TRANSAXLE ")

Fig 4: Removing Cable From Bracket At Transaxle Assembly Side
Courtesy of HYUNDAI MOTOR AMERICA
Remove the control cable inside of cab.