Repair Procedures: Installation

Installation is the reverse of removal.
CAUTION: After replacement or reinstallation procedure of the valve body assembly, must perform procedures below.
NOTE:
- Check fluid level after fill the automatic transaxle with fluid.
  (Refer to Hydraulic System - "Fluid ")
- Perform Transaxle Control Module (TCM) learning after replacing the valve body to prevent slow transaxle response, jerky acceleration and jerky startup.
  (Refer to Automatic Transaxle Control System - "Repair Procedures ")
- Replace the gasket (A) before reinstalling valve body cover.
Fig 1: Installing Valve Body Cover Gasket
Courtesy of HYUNDAI MOTOR AMERICA