Repair Procedures: Removal

[CVVT Oil Control Valve (Intake)] 

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2. Remove the intake manifold.

   (Refer to Engine Mechanical System - "INTAKE MANIFOLD ")

3. Disconnect the CVVT oil control valve connector (A).
4. Remove the installation bolt (B), and then remove the valve from the engine.

   [Bank 1]

   Fig 1: Disconnecting CVVT Oil Control Valve Connector (Bank 1)

   Courtesy of HYUNDAI MOTOR AMERICA

   [Bank 2] 

   Fig 2: Disconnecting CVVT Oil Control Valve Connector (Bank 2)

   Courtesy of HYUNDAI MOTOR AMERICA

[CVVT Oil Control Valve (Exhaust)] 

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2. Disconnect the CVVT oil control valve connector (A).

   [Bank 1] 

   Fig 3: Disconnecting CVVT Oil Control Valve Connector (Bank 1)

   Courtesy of HYUNDAI MOTOR AMERICA

   [Bank 2] 

   Fig 4: Disconnecting CVVT Oil Control Valve Connector (Bank 2)

   Courtesy of HYUNDAI MOTOR AMERICA
3. Remove the cylinder head cover.

   (Refer to Engine Mechanical System - "CYLINDER HEAD COVER ")

4. Remove the installation bolt (A), and then remove the valve from the engine.

   [Bank 1] 

   Fig 5: Removing Valve From Engine (Bank 1)

   Courtesy of HYUNDAI MOTOR AMERICA

   [Bank 2] 

   Fig 6: Removing Valve From Engine (Bank 2)

   Courtesy of HYUNDAI MOTOR AMERICA