[Low Pressure Fuel Line]

Turn the ignition switch OFF, and then remove battery (-) cable.
Release the residual pressure in fuel line.
(Refer to Fuel Delivery System - "Release Residual Pressure in Fuel Line ")
Disconnect the low pressure fuel quick-connector (A) and remove the installation nuts (B).

Fig 1: Disconnecting Low Pressure Fuel Quick-Connector
Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: Locating Installation Nuts
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Low Pressure Fuel Line
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the vapor hose (A) which is connected from the PCSV.

Fig 4: Disconnecting Vapor Hose
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the fuel pump connector (A), FTPS connector (B), and fuel feed quick-connector (B) from the fuel pump.

Fig 5: Disconnecting Fuel Pump Connector And FTPS Connector
Courtesy of HYUNDAI MOTOR AMERICA
Lift the vehicle.
Remove the fuel tank.
(Refer to Fuel Delivery System - "Fuel Tank ")
Disconnect the vapor tube quick-connector (A).

Fig 6: Disconnecting Vapor Tube Quick-Connector
Courtesy of HYUNDAI MOTOR AMERICA
Open the vapor tube and low fuel line fixing clip (A) to using driver.

Fig 7: Opening Vapor Tube And Low Fuel Line Fixing Clip
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the fuel & brake line protect (A) from the fixing clip (B).

Fig 8: Disconnecting Fuel & Brake Line From Fixing Clip
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the fuel line quick-connecter (A).

Fig 9: Disconnecting Fuel Line Quick-Connecter
Courtesy of HYUNDAI MOTOR AMERICA
Remove the installation nut (A), and then open the fuel line fixing clip (B) to engine room low.

Fig 10: Opening Fuel Line Fixing Clip
Courtesy of HYUNDAI MOTOR AMERICA
Remove the fuel line.

Fig 11: Fuel Line
Courtesy of HYUNDAI MOTOR AMERICA