Repair Procedures: Removal

Turn the ignition switch OFF and disconnect the battery negative (-) cable.
Disconnect the CVVT oil control valve connector (A).
Remove the installation bolt (B), and then remove the valve from the engine.
[Bank 1/Intake] #1

Fig 1: Locating CVVT Oil Control Valve Connector And Bolt (Bank 1/Intake #1)
Courtesy of HYUNDAI MOTOR AMERICA

[Bank 1/Intake] #2

Fig 2: Locating CVVT Oil Control Valve Connector (Bank 1/Intake #2)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Locating CVVT Oil Control Valve Bolts (Bank 1/Intake #2)
Courtesy of HYUNDAI MOTOR AMERICA

[Bank 1/Exhaust]

Fig 4: Locating CVVT Oil Control Valve Connector And Bolt (Bank 1/Exhaust)
Courtesy of HYUNDAI MOTOR AMERICA